Aeris F10 Скачать руководство пользователя страница 77

Страница: 77 / 84

Altitude:
•

Operational from Sea Level (= 0 to 3,000 feet/915 meters) to 14,000 feet (4,270 meters) elevation

•

Measures ambient pressure every 30 minutes in Watch Mode and every 15 minutes while in FREE Mode.

•

Does not measure ambient pressure when Wet.

•

Depth compensation for Altitudes above Sea Level beginning at 3,001 feet (916 meters) elevation and every
1,000 feet (305 meters) higher.

Power:
• Battery

(1) 3 vdc, CR2430, Lithium battery

• Shelf life

Up to 7 years (when shipped from factory in Deep Sleep mode)

• Replacement

User replaceable (annual recommended)

• Use Life

300 hours using as a Watch/Dive Gauge.
1 year using as a Watch only

Battery Indicator:
•

Warning - icon on solid < 2.75 volts > 2.50 volts, Battery change recommended

•

Alarm - icon on flashing at <= 2.50 volts, change the Battery, will function only as a Watch

Dive Mode Activation:
•

Automatic - by immersion in water (if set ON) then descent to 4 FT (1.2 min) for 1 second.

•

When in Watch Mode, Dive Mode will not activate if Wet Activation is set OFF.

•

Cannot operate in Free Dive Mode at elevations higher than 14,000 feet (4,270 meters)

•

Reverts to Watch Mode if no dive is made within 2 hours after entry into Free Surface Mode.

Operating Temperature:
•

Out of the water - between 20 °F and 140 °F (-6 and 60 °C).

•

In the water - between 28 °F and 95 °F (-2 and 35 °C).

•

At extremely low temperatures, the LCD may become sluggish, but this will not affect it's accuracy. If stored
or transported in extremely low temperature areas (below freezing), you should warm the unit and its battery
with body heat before diving.

Storage Temperature:
•

Out of the water (in storage case) - between 14 °F and 158 °F (-8 and 70 °C).

SPECIFICATIONS (CONTINUED)

Содержание F10





















































































Результаты поиска

Содержание F10

Отзывы:

Похожие инструкции для F10

Бренды по названию

Популярные бренды

Aeris F10, Руководство по эксплуатации

Результаты поиска

Содержание F10

Отзывы:

Похожие инструкции для F10

Бренды по названию

Популярные бренды