62
Fig. 62 - RDI ALARM
Fig. 61 - EDT ALARM
Fig. 60 - CDT ALARM
CDT (Count Down Timer) Alarm
The Free CDT Alarm will operate during a dive or while on the
surface, when it is set ON.
When the Free Mode CDT decreases to 0:00 (min:sec), 3 sets
of (3) 1 second beeps will sound during which the message
TIMR will flash on the display (Fig. 60), then clear.
EDT (Elapsed Dive Time) Alarm
During dives, the EDT Alarm will repeat each time the Interval
set (:sec) elapses.
When the EDT Alarm is set ON, (2) 2 second beeps will
sound, the red LED will flash, and the message EDT will flash
on the display each time the Time Interval set (:sec) elapses
(Fig. 61), then clear.
RDI (Repeating Depth Interval) Alarm
When the RDI Alarm is set ON, 3 sets of (3) 1 second beeps
will sound, the red LED will flash, and the message DPTH will
flash on the display when you descend the Depth Interval set
(FT/M) (Fig. 62), then clear.
The alarm will repeat and clear each time the Depth Interval set
(FT/M) is reached as descent continues. The RDI will also
sound at the depths the DD Alarms are set at.
Содержание F10
