Aeris F10 Скачать руководство пользователя страница 30

Страница: 30 / 84

WATCH DAILY ALARM

When set ON, the Watch Daily Alarm will sound the Audible Alarm and flash the
red LED every day at the Time set.

• Pressing the M button momentarily 4 times (< 2 seconds each time) while the

Watch Default Time screen is displayed will access the Daily Alarm Status
screen.

DAILY ALARM STATUS

, information includes (Fig. 20):

> AM (or PM) icon
> Graphics ALRM, and ON (or OFF) flashing
> Alarm Time Set Point (hr:min) with TIME icon
> Alarm icon

• Pressing and releasing the S button momentarily (< 2 seconds) will toggle

between ON and OFF.

> Upon being toggled to ON, the Daily Alarm will sound every day at the

Time set while on the surface.

• Depressing both the A and S buttons simultaneously for 2

seconds will access the Set Daily Alarm screen allowing a
new Time to be set.

• Depressing and holding the M button for 2 seconds will

revert to the Watch Default Time screen.

• Pressing the L button will activate the Backlight.

> If no button is pressed during a period of 2 minutes, the unit

will revert to the Watch Default Time screen.

Fig. 20 - DAILY ALARM

STATUS

Содержание F10





















































































Результаты поиска

Содержание F10

Отзывы:

Похожие инструкции для F10

Бренды по названию

Популярные бренды

Aeris F10, Руководство по эксплуатации

Результаты поиска

Содержание F10

Отзывы:

Похожие инструкции для F10

Бренды по названию

Популярные бренды