Aeris F10, Руководство по эксплуатации

Страница: 68 / 84

68
CARE AND CLEANING
Protect your F10 from shock, excessive temperatures, exposure
to chemicals, and tampering. Protect the lens against scratches
with a Instrument Lens Protector. Small scratches will naturally
disappear underwater.
• Soak and rinse the F10 in fresh water at the end of each
day of diving, and check to ensure that the areas around
the Low Pressure (Depth) Sensor (Fig. 66a), PC Interface
Data Port (Fig. 66b), and Buttons are free of debris or
obstructions.
• To dissolve salt crystals, soak in lukewarm water or a
slightly acidic bath (50% white vinegar/50% fresh water).
After removal from the bath, place the F10 under gently
running fresh water and towel dry before storing.
• Transport your F10 cool, dry, and protected.
INSPECTIONS AND SERVICE
Your F10 should be inspected annually by an Authorized
AERIS Dealer who will perform a factory prescribed function
check and inspection for damage or wear. To keep the 2 year
limited warranty in effect, this inspection must be completed
one year after purchase (+/- 30 days).
AERIS recommends that you continue to have an inspection
performed every year to ensure it is working properly. The
costs of annual inspections are not covered under the terms of
the 2 year limited warranty.
b
a
Fig. 66 - CASE BACK