Aeris F10 Скачать руководство пользователя страница 69

Страница: 69 / 84

To Obtain Service:

Take your F10 to an Authorized AERIS Dealer.

To return your F10 to AERIS:

• Record all data in the viewable Log and/or download the data in memory.

All data will be erased during factory service.

• Package it using a protective cushioning material.
• Include a legible note stating the specific reason for return, your name,

address, daytime phone number, serial number(s), and a copy of your
original sales

receipt and Warranty Registration Card.

• Send freight prepaid and insured using a traceable method to AERIS.
• If shipping to AERIS, obtain an RA (Return Authorization) number by

contacting AERIS Customer Service at 510/546-0010 or send an email to
[email protected].

• Non warranty service must be prepaid. COD is not accepted.
• Additional information is available at the AERIS web site >>>>

diveaeris.com

BATTERY REPLACEMENT

NOTE: The procedures that follow must be closely adhered to.
Damage due to improper Battery replacement is not covered
by the 2 year warranty.

The Battery Compartment should only be opened in a dry and clean environment
with extreme care taken to prevent the entrance of moisture or dust.

Содержание F10





















































































Результаты поиска

Содержание F10

Отзывы:

Похожие инструкции для F10

Бренды по названию

Популярные бренды

Aeris F10, Руководство по эксплуатации

Результаты поиска

Содержание F10

Отзывы:

Похожие инструкции для F10

Бренды по названию

Популярные бренды