6 / 36
TF6089_B
Aereco S.A.
Dimensions of DXR Unit (mm)
2.2. CONSTRUCTION / DIMENSIONS
DXR Unit 230 m
3
/h– Heat recovery unit
140
1160
124
158
246 258
1260
140
328
328
714
650
DN1
60
DN
16
0
316
125
See the characteristics of the DXR Unit system on page 31
·Envelope in galvanised steel, painted in white
·2 low energy consumption fans driven by EC electronic motors
(supply air and exhaust air).
·F7 anti pollen filter for the fresh air.
·Supply and return G4 filters to protect fans and the exchanger.
·Continously checking of filter clogging, and warning for filter change.
·High efficiency heat exchanger with aluminium plates, washable.
·Intelligent electronic control unit of the heat recovery, with control
interface.
·Integrated bypass and free cooling automatically controlled.
·Flexible duct to drain condensate.
118
151
622
577
31,5
21,5
DN 100
DN 125
DN 100
DN 160
433
200 DN 100
100
100
468
494
520
546
DN 13
DN 160
151
100
DN 158
100
126
200
773
750
685
105
129
DN 75
DN 158
114
340
DN 13
695
685
254
280
124
78
134
636
636
755
Dimensions of DX Hub 6 (mm)
DX Hub – Distribution box for demand controlled supply airflows
·Envelope in galvanised steel.
·Dampers for supply airflows, driven by sensors (Presence or CO
2
)
for each room.
·Damper for balance of the airflows
·Ducts DN100 compatibility (DX Hub 5)
·Ducts DN75 compatibility (DX Hub 6)
The distribution box (DX Hub) coupled to the heat recovery unit
(DXR Unit) enables the balance between supply and exhaust
airflows.
Assembling of the DXR spigots
2.3. DXR ASSEMBLING
When delivered, the DXR unit is furnished with 4 spigots with 4 screws each.
Those 4 spigots have to be screwed and sealed to the DXR unit as indicated on
the scheme.
The seal can be made thanks to silicone seal.
Following the seal applied on the DXR Unit, a drying time has
to be taken into account before the operability of the DXR.
Dimensions of DX Hub 5 (mm)
