21 / 36
TF6089_B
Aereco S.A.
6.4. FILTERS
The interface indicates when the filters need to be changed. Their change is easily realised through
the two access hatches (no tool needed).
The bottom cover of the DXR Unit must not be dismounted for this operation. All filters (1xG4
and 1xF7) must be replaced at the same time.
Filter removal/replacement:
Removal
1. Switch off the unit.
2. Remove both filter hatches
Remove 2 fixing buttons. Hold the hatches with you hand to prevent it from falling.
3. Remove each filter by holding it firmly along its edge and pulling it downward out of the filter slot
(the filter is a push-fit item and not fastened in place).
Fresh air
(outdoor)
G4 filter
Exhaust air
(indoor)
F7 filter
