background image

 

100,000-count graphical multimeters 

47 

 

Limited Warranty 

The MTX Multimeters are warranted to the owner for a period of three years from the date of original 
purchase against defects in manufacture. This limited warranty is given by AEMC

®

 Instruments, not by 

the distributor from whom it was purchased. This warranty is void if the unit has been tampered with, 
abused or if the defect is related to service not performed by AEMC

®

 Instruments.  

For full and detailed warranty coverage, please read the Warranty Coverage Information, which 
is attached to the Warranty Registration Card (if enclosed) or is available at 

www.aemc.com

Please keep the Warranty Coverage Information with your records. 

What AEMC

®

 Instruments will do:

 

If a malfunction occurs within the three-year period, you may return the instrument to us for repair, 
provided we have your warranty registration information on file or a proof of purchase. AEMC

®

 

Instruments will, at its option, repair or replace the faulty material.

 

 

 

Warranty Repairs 

What you must do to return an Instrument for Warranty Repair: 

 

First, request a Customer Service Authorization Number (CSA#) by phone or by fax from our Service 
Department (see address below), then return the instrument along with the signed CSA Form. Please 
write the CSA# on the outside of the shipping container. Return the instrument, postage or shipment 
pre-paid to: 

Ship To:

 Chauvin Arnoux

®

, Inc. d.b.a. AEMC

®

 Instruments 

 

15 Faraday Drive • Dover, NH 03820 USA 

 

Phone:  (800) 945-2362  (Ext. 360) 

 

 

(603) 749-6434  (Ext. 360) 

 

Fax: 

(603) 742-2346 or (603) 749-6309 

 E-mail: 

[email protected] 

Caution:

 To protect yourself against in-transit loss, we recommend you insure your returned material. 

NOTE: You must obtain a CSA# before returning any instrument. 

Содержание MTX 3281B

















































Отзывы: