Functional description
100,000-count Graphical Multimeters
11
Functional description (cont'd)
Selection of
energy type
For correct management of the battery or accumulator charge status indicator,
the type of power must be selected:
Opening of the
Configuration
menu with the
key.
Selection of the "
General"
function using the
keys.
Validation of
General settings
using the
key
.
Selection of
Energy Type
menu using the
keys
.
Modification of the Energy Type (battery or acc.) using the
key
.
Validation and exit from the successive menus using the
key.
Recharging the
accumulators
Before carrying out this operation, check that the accumulators are
fitted in the
instrument ; they do not need to be removed from the multimeter to be
recharged.
Recharging is only possible if "Accumulator" has been selected in the Energy
Type menu (see above).
If you try to recharge the accumulators when the batteries are fitted in the
multimeter, it could damage it.
For safety reasons, the accumulators should only be loaded at between 0 and
40°C.
Caution
High internal temperature due to a current measurement may
trigger the thermal security mechanism.
General
IR baud 9600
Config user
Accumulator
Energy type
Energy bat.
Configuration
Measure
Func.
General settings
Func. MATH
General
