34
PD201808 AEG GRID-TIED THREE-PHASE SOLAR INVERTER (12-30 kW) V.2-18 EN
34
1.
Curve. The curve displays the power generation on the current day;
2.
Current key parameters of the inverter: three lines of words are displayed at a time, but if the inverter is in
operation or stand-by state, the words are rolling forward in 3s interval. The user can press “ ” or “ ” to
look the desired information up;
3.
5 inverter states;
4.
Fault codes. If the inverter is in fault or warning state, up to 8 fault codes can be displaying on the screen.
5.4 Functions operation
Most of the parameters can be viewed and set through the LCD screen and operation panel.
M a i n M e n u
M o n i t P a r a m
H i s t o r y
S t a t i s t i c s
S e t u p
S y s t e m I n f o
F a u l t I n f o
Figure 17: Main interface
5.4.1 Monitoring parameters
Press “ ” and “ ” in the main interface to select Monitoring Parameters (“Monit Param”), and then press “ENT” to
view the parameters shown in figure 18. Go the front or next window through “ ” and “ ” and return through “ESC”.
C u r r e n t S t a t e
E - t o d : 0 W h
$ - t o d :
€
0 . 0 0
P - i n
: 0 . 0 0 k W
Figure 18: Monitoring parameters
Monitoring parameters (as visible from the LCD screen)
Total power produced this day (E-tod)
Grid current W (IoutW)
Temperature 2 (Tinv2)
Total power saved this day ($-tod)
Grid frequency (Fgrid)
Total power consumption (E-tot)
Input power (P-in)
Power factor(pf)
Total time (h-tot)
Output power (P-out)
Input V 1 (V-pv1)
Current date (Data)
Peak power (PpDay)
Input I1 (I-pv1)
Current time (Time)
Grid voltage U (VoutU)
Input V2 (V-pv2)
First power-on time of today (Power ON)
Grid voltage V (VoutV)
Input I2(I-pv2)
First running time of today (Run Time)
Grid voltage W (VoutW)
Grounding resistor (Riso)
Peak power time of today (Ppk Time)
Grid current U (IoutU)
Leakage current (Ileak)
Stop running time of today (Today OFF)
Grid current V(IoutV)
Temperature 1 (Tinv1)
Stop running time of yesterday (Last OFF)
Table 15B: monitoring parameters
