![AEG Electrolux LAVAMAT 5.0 Скачать руководство пользователя страница 17](http://html1.mh-extra.com/html/aeg-electrolux/lavamat-5-0/lavamat-5-0_user-manual_2860249017.webp)
17
Use
SUPER QUICK: by pressing this button
twice
, the corresponding symbol remains
alight on the display and you will be able to short the washing duration for
«lightly soiled laundry».
The display will show the shorted washing time. To be used for
very lightly soiled
laundry only.
Select an additional rinse (EXTRA RINSE)
This appliance is designed for saving water. However, for people with a very
delicate skin (allergic to detergents) it may be necessary to rinse the laundry
using an extra quantity of water (extra rinse).
If you wish to activate this option permanently for every washing cycle, press
simoultaneously
2
and
3
buttons for about 6 seconds: the pilot light
10.2
illuminates. This option remains active permanently.
If you wish to cancel it depress the same buttons untill the light goes off.
Press the START/PAUSE (button 8)
To start the selected programme, press the button
8
; the corresponding red pilot
light stops blinking.
The symbols
7.4
and
7.5
appear on the display to indicate that the appliance
has started operating and the door is locked. If you have chosen a delayed start,
the machine will begin the countdown.
To interrupt a programme which is running, press the button
8
:
the
corresponding red pilot light starts blinking.
To restart the programme from the point at which it was interrupted,
press
the
button
8
again
.
If an incorrect option is selected, the yellow pilot light of the button
8
blinks 3
times, the message
Err
is displayed for about 2 seconds.
Select the DELAY START by pressing the button
9
The washing programme can be delayed from 30 min - 60 min - 90 min, 2 hours
and then by 1 hour up to a maximum of 20 hours by means of this button.
Before you start the programme
, if you wish to delay the start, press the
button
9
repeatedly, to select the desired delay. The corresponding symbol will
appear on the display
The selected delay time value (up to 20 hours) will appear on the display for
quelques seconds, then the duration of the programme will appear again.
You must select this option after you have set the programme and before you
press the button
8
.
132960250.qxd 18/09/2008 14.29 Pagina 17