16
Use
to prevent the fabrics from creasing. At the end of the programme, the display
shows a blinking «
0
» and the symbol
7.5
(door locked) remains lit, the pilot light of
button
8
goes off and the door is locked to indicate that the water must be
emptied out.
To empty out the water, please read chapter «At the end of the
programme».
Programme option buttons
Depending on the programme, different functions can be combined. These must
be selected after choosing the desired programme and before pressing button
8
.
When these buttons are pressed, the corresponding pilot lights come on. When
they are pressed again, the pilot lights go out.
If an incorrect option is selected, the yellow pilot light of the button
8
flashes
for 3 times and the
Err
message appears on the display for a few seconds.
For the compatibility between this option and washing programmes consult the
chapter «Washing programmes».
PREWASH option (button 4)
Select this option if you wish your laundry to be prewashed at 30°C before the
main wash.
The Prewash ends with a short spin in programmes for cotton and synthetic
fabrics, whereas in the programmes for delicate fabrics the water is only drained.
The relevant light button illuminates.
STAIN option (button 5)
Select this option to treat heavily soiled or stained laundry with stain remover
(extended main wash with time optimised stain action phase).
This option
is not
available with a temperature lower than 40°C.
Attention!
If you wish to perform a programme with the stain option, pour stain
remover into compartment
.
TIME SAVING option (button 6)
The washing machine proposes by default the washing cycle for «Normally soiled
laundry». By pressing this button the washing cycle can be shorted as follows:
DAILY: by pressing this button
once
, the corresponding symbol appears on the
display and you will be able to short the washing duration for «Daily soiled
laundry». The display will show the shorted washing time. To be used for daily
soiled laundry.
132960250.qxd 18/09/2008 14.29 Pagina 16
