Display (7)
Child safety lock symbol
Duration of the selected programme
After selecting a programme, the duration is displayed in hours and minutes (for
example
2.05
). The duration is calculated automatically on the basis of the
maximum recommended load for each type of fabric.
After the programme has started, the time remaining is updated every min
ute.
Delay start
The selected delay (20 hours max) set by pressing the relevant button appears on
the display for about 3 seconds (for example
90’
), then the duration of the
previously selected programme is displayed. The symbol
7.3
will appear on the
display.
The delay time value decreases by one unit every hour and then, when remains 1
hour, the time decreases every minute.
Incorrect option selection
If an option which is not compatible with the set wash programme is selected,
the message
Err
is displayed for a few seconds and the yellow light of button
8
starts blinking.
Alarm codes
In the event of operating problems, some alarm codes can be displayed, for
example
E20
(see chapter «What to do if...»).
End of the programme
When the programme has finished a blinking zero «
0
» is displayed, the
7.5
symbol (Door) disappears from the display and the door can be opened.
7.1
7.2
7.3
7.4
7.5
11
Display
7.1
7.2
132960250.qxd 18/09/2008 14.29 Pagina 11
