Advantech PCA-6157, Руководство пользователя

Страница: 93 / 123

86 PCA-6157/6157L User's Manual
1. Link the BTLD into the UNIX kernel during installation.
a. If the SCSI hard disk has any existing partitions, delete them.
b. Insert the SCO UNIX N1 installation disk and reboot the
system.
c. At the Boot: prompt type:
link
Press Enter.
d. At the next prompt type:
bscam
Note: bscam refers to the SDMS driver package
Do not remove the N1 diskette. Press Enter.
e. At the next prompt, replace the N1 diskette with the SCO
SDMS Device Drivers diskette (which contains the BTLD),
and press Enter.
When using the BTLD to install UNIX, the CAM3
configuration tool is automatically installed.
f. Continue from this point as a normal installation according
to the SCO UNIX documentation.
Note: Remember, the Basic and Extended Utilities
packages must be loaded when using the BTLD.
g. NCR recommends creating a second copy of UNIX. Log in
as root and issue the command:
cp /unix /unix.good
This creates a second copy of UNIX under the name
/unix.good
Note: If any problems arise with the kernel being built in
UNIX, this procedure ensures that a valid copy of
UNIX will be available.