Advantech PCA-6157, Руководство пользователя

Страница: 77 / 123

70 PCA-6157/6157L User's Manual
Installing OS2CAM.ADD and OS/2 (from a SCSI CD-ROM) to a
SCSI Hard Drive
To install OS/2 from a SCSI CD-ROM attached to an NCR host
adapter, the SCSI driver must be present in order to access the
CD-ROM. The following steps allow installation of OS/2 from a
SCSI CD-ROM.
1. Make copies of the two floppy disks used for installation that
are included with the CD-ROM version of OS/2. These disks
are labeled “Installation Diskette” and “Diskette 1”.
2. Copy the files OS2CAM.ADD and OS2CAM.DDP from the
NCR distribution disks to the copy of “Diskette 1”.
3. Edit the file CONFIG.SYS on the copy of “Diskette 1” by
adding the following line:
BASEDEV=OS2CAM.ADD /v 4.
4. Place the copy of “Installation Diskette” in the A: drive and
reboot the computer.
5. Proceed with the OS/2 installation process as documented in the
OS/2 Installation Guide.
Driver Order in the CONFIG.SYS File
Because of the way OS/2 assigns drive letters, the order in which
drivers appear in the CONFIG.SYS file is important. The drivers
must appear in the order in which the drive letters are to be
assigned. Refer to the OS/2 documentation to fully understand this
requirement.
Command Line Options
The OS2CAM.ADD driver has several embedded functions which
can be accessed via switches on the command line in the
CONFIG.SYS file. These options are described below.