Advantech EKI-8500 Series Скачать руководство пользователя страница 70

Страница: 70 / 98

EKI-8500 Series User Manual

The following table describes the items in the Frame Preemption Configuration page.

4.3.5.3

TAS

4.3.5.3.1

Ports

This function allows the user to inspect the current TAS configurations, and possibly

change them as well.

Navigate to

Configuration

TSN

TAS

and click

Ports

The TAS Configuration Parameters page displays.

Figure 4.33 TAS Configuration Parameters

Item

Description

Port

Displays the logical port for the settings contained in the same row.

Please note that Frame Preemption is not supported on ports with

maximum speed 25 Gigabit/sec and is also not supported on 10G

Gigabit/sec Aquantia Copper port.

Frame Preemption

Click to enable or disable (default) the value of the 802.3br

aMACMergeEnableTx parameter for the port. This value determines

whether frame preemption is enabled (TRUE) or disabled (FALSE) in

the MAC Merge sublayer in the transmit direction.

Start without LLDP

Click to enable or disable (default) when this field is checked, Frame

Preemption will be active when Frame Preemption TX is checked.

Verify Disable TX

Click to enable or disable (default) the value of the 802.3br

aMACMergeVerifyDisableTx parameter for the port. This value

determines whether the verify function is disabled (TRUE) or enabled

(FALSE) in the MAC Merge sublayer in the transmit direction.

Preemptable Queues Click to select the parameter to a preemptive status for the priority. If

checked, it takes value preemptable if frames queued for the priority

are to be transmitted using the preemptable service for the Port. If not

checked, it takes value express if frames queued for the priority are to

be transmitted using the express service for the Port and preemption

is enabled for the Port.

Save

Click

Save

to save changes.

Reset

Click

Reset

to undo any changes made locally and revert to

previously saved values.

Cancel

Click

Cancel

to return to the previous menu without saving any

updates.

Содержание EKI-8500 Series



































































































Результаты поиска

Содержание EKI-8500 Series

Отзывы:

Похожие инструкции для EKI-8500 Series

Бренды по названию

Популярные бренды

Advantech EKI-8500 Series, Руководство пользователя

Результаты поиска

Содержание EKI-8500 Series

Отзывы:

Похожие инструкции для EKI-8500 Series

Бренды по названию

Популярные бренды