Advantech EKI-8500 Series Скачать руководство пользователя страница 52

Страница: 52 / 98

EKI-8500 Series User Manual

Mode

Click the drop-down menu to indicate the behavior of the port.

Options:



Access: Access ports are normally used to connect to end

stations. Dynamic features like Voice VLAN may add the port to

more VLANs behind the scenes. Access ports have the

following characteristics:

Member of exactly one VLAN, the Port VLAN (a.k.a. Access

VLAN), which by default is 1
Accepts untagged and C-tagged frames
Discards all frames not classified to the Access VLAN
On egress all frames are transmitted untagged



Trunk: Trunk ports can carry traffic on multiple VLANs

simultaneously, and are normally used to connect to other

switches. Trunk ports have the following characteristics:

By default, a trunk port is member of all VLANs (1 to 4095)
The VLANs that a trunk port is member of may be limited by

the use of Allowed VLANs
Frames classified to a VLAN that the port is not a member of

are discarded
By default, all frames but frames classified to the Port VLAN

(a.k.a. Native VLAN) get tagged on egress. Frames classified

to the Port VLAN do not get C-tagged on egress
Egress tagging can be changed to tag all frames, in which

case only tagged frames are accepted on ingress



Hybrid: Hybrid ports resemble trunk ports in many ways, but

adds additional port configuration features. In addition to the

characteristics described for trunk ports, hybrid ports have these

abilities:

Can be configured to be VLAN tag unaware, C-tag aware, S-

tag aware, or S-custom-tag aware
Ingress filtering can be controlled
Ingress acceptance of frames and configuration of egress

tagging can be configured independently

Port VLAN

Enter the string to indicate the port’s VLAD ID (range: 1 to 4095,

default 1).

Item

Description

Содержание EKI-8500 Series



































































































Результаты поиска

Содержание EKI-8500 Series

Отзывы:

Похожие инструкции для EKI-8500 Series

Бренды по названию

Популярные бренды

Advantech EKI-8500 Series, Руководство пользователя

Результаты поиска

Содержание EKI-8500 Series

Отзывы:

Похожие инструкции для EKI-8500 Series

Бренды по названию

Популярные бренды