Advantech EKI-8500 Series Скачать руководство пользователя страница 53

Страница: 53 / 98

EKI-8500 Series User Manual

Port Type

Click the drop-down menu to indicate the port type. Options:



Unaware: On ingress, all frames, whether carrying a VLAN tag

or not, get classified to the Port VLAN, and possible tags are not

removed on egress.



C-Port: On ingress, frames with a VLAN tag with TPID = 0x8100

get classified to the VLAN ID embedded in the tag. If a frame is

untagged or priority tagged, the frame gets classified to the Port

VLAN. If frames must be tagged on egress, they will be tagged

with a C-tag.



S-Port: On egress, if frames must be tagged, they will be tagged

with an S-tag. On ingress, frames with a VLAN tag with TPID =

0x88A8 get classified to the VLAN ID embedded in the tag.

Priority-tagged frames are classified to the Port VLAN. If the port

is configured to accept Tagged Only frames (see Ingress

Acceptance below), frames without this TPID are dropped.



S-Custom-Port: On egress, if frames must be tagged, they will

be tagged with the custom S-tag. On ingress, frames with a

VLAN tag with a TPID equal to the Ethertype configured for

Custom-S ports get classified to the VLAN ID embedded in the

tag. Priority-tagged frames are classified to the Port VLAN. If the

port is configured to accept Tagged Only frames (see Ingress

Acceptance below), frames without this TPID are dropped.

Ingress Filtering

Click to enable (default) or disable ingress filtering.



Enabled: frames classified to a VLAN that the port is not a

member of get discarded.



Disabled: frames classified to a VLAN that the port is not a

member of are accepted and forwarded to the switch engine.

However, the port will never transmit frames classified to VLANs

that it is not a member of.

Ingress Acceptance Click the drop-down menu to indicate the ingress acceptance type.

Options:



Tagged and Untagged: Both tagged and untagged frames are

accepted. See Port Type for a description of when a frame is

considered tagged.



Tagged Only: Only frames tagged with the corresponding Port

Type tag are accepted on ingress.



Untagged Only: Only untagged frames are accepted on ingress.

See Port Type for a description of when a frame is considered

untagged.

Egress Tagging

Click the drop-down menu to indicate the frame egress tagging

control. Options:



Untag Port VLAN: Frames classified to the Port VLAN are

transmitted untagged. Other frames are transmitted with the

relevant tag.



Tag All: All frames, whether classified to the Port VLAN or not,

are transmitted with a tag.



Untag All: All frames, whether classified to the Port VLAN or not,

are transmitted without a tag. This option is only available for

ports in Hybrid mode.

Allowed VLANs

Enter the string to indicate the bound VLAN membership.

By default, a Trunk or Hybrid port becomes member of all VLANs, and

is therefore set to 1 to 4095.

Item

Description

Содержание EKI-8500 Series



































































































Результаты поиска

Содержание EKI-8500 Series

Отзывы:

Похожие инструкции для EKI-8500 Series

Бренды по названию

Популярные бренды

Advantech EKI-8500 Series, Руководство пользователя

Результаты поиска

Содержание EKI-8500 Series

Отзывы:

Похожие инструкции для EKI-8500 Series

Бренды по названию

Популярные бренды