Advantech EKI-8500 Series, Руководство пользователя

Страница: 54 / 98

EKI-8500 Series User Manual 43
4.3.3.2 SVL Configuration
The function allows you to configure VLAN control settings.
In SVL, one or more VLANs map to a Filter ID (FID). By default, there is a one-to-one
mapping from VLAN to FID, in which case the switch acts as an IVL bridge, but with
SVL multiple VLANs may share the same MAC address table entries.
1. Navigate to Configuration > VLANs and click SVL .
The Shared VLAN Learning Configuration page displays.
Figure 4.13 Shared VLAN Learning Configuration
The following table describes the items in the previous figure.
4.3.4 QoS
4.3.4.1 Port Classification
This function allows you to configure the basic QoS Classification settings for all
switch ports.
1. Navigate to Configuration > QoS and click Port Classification .
Forbidden VLANs Enter the string to indicate the exclusion of membership to a VLAN
membership.
Note: Dynamic VLAN protocols like MVRP and GVRP must be
prevented from dynamically adding ports to VLANs, which is achieved
through this function.
By default, the field is left blank indicating that the port can be a
member of all possible VLANs.
Save Click Save to create a new user account.
Reset Click Reset to clear the settings.
Item Description
Item Description
Delete Click Delete to remove an allocated FID.
FID Enter the string to indicate the ID to bind with the VLAN learning
function as shown in the MAC table. SVL must be enabled. Range: 1
to 4095.
VLANs Enter the string to indicate the VLANs to be mapped into FID. Both
individual and range entries are supported.
Add FID Click Add FID to add a new entry in the SVL table.
Save Click Save to create a new user account.
Reset Click Reset to clear the settings.