Advantech EKI-8500 Series, Руководство пользователя

Страница: 68 / 98

EKI-8500 Series User Manual 57
The following table describes the items in the Port Storm Policer Configuration figure.
Port storm policers for all switch ports are configured on this page.
Figure 4.30 Port Storm Policer Configuration
4.3.5 TSN
4.3.5.1 PTP Check
When using TAS and PSFP between network elements, it is required to have a
common global time reference provided by PTP. When booting the device, it will take
some time for a configured PTP application to get locked to the common time
reference. It may cause malfunctioning of TAS and PSFP if config-change is issued
Enable Click to enable or disable (default) the global storm policer for the
given frame type.
Rate Enter the string to indicate the rate for the global storm policer (value:
10 to 13128147 fps or kbps, and 1 to 13128 kfps or Mbps). Supported
rates are divisible by 10 fps or 25 kbps.
Unit Click the drop-down menu to select the unit of measure for the global
storm policer rate (value: fps, kfps, kbps or Mbps).
Save Click Save to save changes.
Reset Click Reset to undo any changes made locally and revert to
previously saved values.
Item Description
Port Displays the port number for the configuration below applies.
Enable Click enable or disable (default) the storm policer for this switch port.
Rate Enter the string to indicate the rate for the port storm policer (value: 10
to 13128147 fps or kbps, and 1 to 13128 kfps or Mbps). Supported
rates are divisible by 10 fps or 25 kbps.
Unit Click the drop-down menu to select the unit of measurement for the
port storm policer rate (value: fps, kfps, kbps or Mbps).
Save Click Save to save changes.
Reset Click Reset to undo any changes made locally and revert to
previously saved values.
Item Description