manualshive.com logo in svg

Advanced Axis AX-CTL-1L, Руководство по установке и эксплуатации

Поделиться
Скачать
Advanced Axis AX-CTL-1L Скачать руководство пользователя страница 101

 

 

www.advancedco.com 

 

101

Selecting the “FINISHED TEST” option will cancel all zones that are in test mode. The Test LED will then 
extinguish. 

Alternatively, it is possible to leave the Zone Test menu with one or more zones still in test mode by selecting the 
“KEEP ZONES IN TEST” option. This will enable the inspection or use of other menu functions and return the 
display to the normal operating mode. The Test LED will stay illuminated if this option is selected. 

If no zones are still in test condition, a pop-up window with the following option will appear: 

 FINISHED TEST             

.

 

 

                           

.

 

 

 

 
Press the

✔

 button to exit the Test area. 

7.8.4.2 Test 

Display 

The Test Display option checks the operation of all the LEDs and the graphical display of the AX-DSP. All of the 
LEDs are turned on and the entire display is shown in reverse (inverted). In addition to testing the AX-DSP, the Test 
Display also tests the LEDs of all of the Switch LED Modules connected to the associated AX-CTL base card. 

Note:  Test Display also tests the LEDs of all of the Switch LED Modules connected to the associated AX-
CTL base card. 

During this test, it is possible to test the operation of the

, 

, 

, 

, 

✔

 and 

0-9

 buttons. When a button is pressed 

it is indicated on the display. For example: 

 

                                      

                    

                                          

            

LCD & KEY TEST 

 
                   

 

 

                               

 

 
Press the “Esc”

 

button

 

to return to the Test Menu. If no button is pressed for 10 seconds, the display will 

automatically revert to the normal operating display. 

7.8.4.3 Test 

Buzzer 

When the Test Buzzer option is selected, the internal buzzer will pulse for approximately five seconds. 

 [Test Menu]              User 1 Node  1 

 

   ZONES   DISPLAY   

BUZZER

   PRINTER 

   OUTPUTS 

7.8.4.4 Test 

Printer 

To Test the printer, highlight the Test Print option and press the 

✔

 button to confirm. The panel transmits 16 lines of 

test characters to the printer. The information sent is also sent to the AX-DSP graphical display. 

Note:  The printer test function will only work if a printer is programmed on the system. If no printer is 
programmed, the display will indicate “NO PRINTER SELECTED!” 

When the test print is completed, the display automatically reverts to the Test Options Menu. 

Press the “Esc”

 

button at any time to cancel the test print. 

 

 

 

Содержание Axis AX-CTL-1L























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды