ADVANCED UV LIGHT Future Sun HP, Руководство пользователя

Страница: 67 / 73

67
Futuresun HP V2
CAUTION!
The UV-lamp in the
SunFresh container
could be damaged during
replacement. Never touch
the UV-lamp. Replacement
of UV lamp must be
performed by authorized
service personnel.
The water level is controlled by a sensor. If the
minimum level of the SunFresh container is reached,
the display shows the message “E 06”. In this case,
the SunFresh container needs to be refilled. Proceed
as follows:

Deactivate the mains disconnection switch and
secure with lock and key against accidental
activation.

Lift up the sunbed acrylic (1).

Pull up the support bar (2) and when in straight
position, push the support down until it snaps in
(3).

Let the sunbed acrylic down so that it is supported
by the support bar.

Remove the front cover plate as described in the
chapter "Removal of front cover plate".

Take the SunFresh off the assembly plate for
the SunFresh container and condensation water
container.

Take out the germicidal unit.
Survey germicidal unit:
1
Hose (blue)
2
Supply cable
3
UV-lamp
4
SunFresh-container
5
Plunge pipe
CAUTION!
Use only distilled water for
refill. The SunFresh function
may be affected by using
non-dimineralized water

If necessary refill with distilled water to the max.
mark.

Put the plunge pipe into the lid of the germicidal
unit.