33
Futuresun HP V2
Assembly of ballast tray inserts onto
the ballast tray.
The provided ballast tray inserts must be installed
onto the ballast tray. Proceed as follows:
Put the ballast tray inserts into the guide rails on
the ballast tray.
The ballast tray inserts feature drill holes in the front
and u-shaped drill holes at the rear side.
Screw the ballast tray inserts onto the ballast tray.
Follow the same procedure to assemble the
remaining ballast tray inserts.
Preparing the electrical connection
DANGER
RISK OF ELECTRIC
SHOCK!
Only a certified electrician
according to EN 60204-1/
VDE 0113 and current EVU-
standards is authorized
to perform the electrical
connection.
For export units: All local/
national standards and
regulations apply!
DANGER
RISK OF ELECTRIC
SHOCK!
The on-site supply
connection must be
secured by a suitable mains
disconnection switch and
an FI safety switch.
CAUTION
RISK OF DAMAGE TO
EQUIPMENT!
Check if electrical
specifications of local
mains supply system
correspond with the
electrical data on the type
label of the unit.
Do not connect the unit if
data on the type label do
not comply with electrical
specifications on the site.
Содержание Future Sun HP
Страница 72: ...72 Futuresun HP V2 ...
Страница 73: ...73 Futuresun HP V2 ...