43
Futuresun HP V2
Set Up of electronic controls
CAUTION!
Incorrectly performed set-
up of the electronic controls
can cause serious damage to
the equipment. The following
jobs must be performed by
authorized service personnel
only.
Via the control panel you have access to the operator
menu. In the operator menu mode you can set
operating hours for the UV – and HID lamps. In this
mode you can also select and customize certain
features.
The options in the operator menu can
only be set up when the unit is on stand-
by.
Turn the mains disconnection switch to “I”.
Push the following sequence of buttons:
– “Body cooling top canopy”,
– “Facials”,
– “Body cooling top canopy”,
– “AC unit”,
– “AC unit”.
In order to get to a certain point in the menu, push
the music button until the requested menu point
shows up.
In order to change a value for the chosen menu
point, push the button “+” or “–”.
Sample set-up
The following example shows you how to select set-
ups for the operator menu.
If you want to check operating hours for low-pressure
lamps, for instance, proceed as follows:
Turn the mains disconnection switch to “I”.
Then press the following sequence of buttons:
– “Cooling top canopy”,
– “Facials”,
– “Cooling top canopy”,
– “AC unit”,
– “AC unit”.
You are now in the operator menu. The operating
hours for the low-pressure lamps are set up in menu
point “02”.
In order to get to this menu point push the “Music”
button twice.
Menu point “02” is shown.
With the buttons “+” and “–” enter the required
value, for instance “500”.
With the “+” button you increase the value shown
in the display.
With the “–” button you reduce the value shown
in the display.
In order to go to the next point in the menu, press
the “Music” button until you reach the required
menu point.
In order to leave the operator menu, push the
“Music” button until you have reached the final
menu point.
The set up will be saved automatically.
In this sample set up, the display will indicate by a
blinking point in the lower right corner that the pre-set
max. operating time of 500 hours for the low-pressure
lamps has been reached.
Содержание Future Sun HP
Страница 72: ...72 Futuresun HP V2 ...
Страница 73: ...73 Futuresun HP V2 ...
