Advance acoustic ADVANCE RS 501, Руководство по обслуживанию

Страница: 89 / 155

ENGLISH SERVICE MANUAL
86 33019746(2)2010-03 RS 501
MOTORE KUBOTA V1505T
ENGINE COOLANT LINE SLEEVE CHECK
Empty the hopper (3); if it contains a small quantity of waste, it is not necessary to dump it. 1.
Drive the machine on a solid and level ground, then engage the parking brake with the lever (66). 2.
Lift the hopper (3), according to the procedure shown in the Instructions for use Manual. 3.
Turn the ignition key (76) to OFF position and remove it. 4.
Open the right and left doors (20) and (18) by releasing the fasteners (21) and (19) with the supplied key. 5.
Remove the locking pins (28) from the housings (29) and place them into the holes (30). 6.
Empty the dust control system water tanks (7 and 16) according to the procedure shown in the relevant paragraph. 7.
Remove the screws (44) and (42) and open the right (16) and left tanks (7). 8.
WARNING!
Open the tanks (7 and 16) only if they are empty: Each tank contains 264.5 lb (120 kg) of water approximately.
Check that the radiator hoses (E) are fastened and integral. Check: 9.
The lower sleeve (A) both on the engine side and the expansion tank side (F) •
The upper sleeve (B) both on the engine side and the expansion tank side (F) •
The lower sleeve (D) both on the radiator side (E) and the expansion tank side (F) •
The upper sleeve (D) both on the radiator side (E) and the expansion tank side (F) •
If the sleeve clamps are loosen, apply oil on threads and fasten securely.
10.
If the sleeves are worn and/or damaged replace them together with the clamps. If it necessary to replace one or more sleeves, 11.
it is advisable to drain the cooling system.
Perform steps 3, 4, 5, 6, 8 and 9 in the reverse order.
12.
If necessary, fi ll the dust control system water tanks according to the procedure shown in the Instructions for use Manual. 13.
C
B
D
A
E
F
S341037