Advance acoustic ADVANCE RS 501, Руководство по обслуживанию

Страница: 71 / 155

ENGLISH SERVICE MANUAL
68 33019746(2)2010-03 RS 501
IMPIANTO DI TRAZIONE
ENGINE START-UP INHIBITION SYSTEM CHECK AND ADJUSTMENT OF THE RELEVANT SENSOR
Check
Check that, when one of the two sensors located in the lower part of the pedal, does not read (the sensor LED is off), the 1.
engine does not start.
If necessary, adjust the relevant sensor according to the following procedure.
Adjustment
Engage the parking brake with the lever (66). 1.
Turn the ignition key (76) to OFF position and remove it. 2.
Check that the surface (A) of the sensor (B) is fl ush with the surface (C) of the drive pedal. 3.
If necessary, loosen the sensor mounting nut (D) and adjust the sensor position. When the adjustment is completed, tighten
the nut (D).
Check that the distance between the sensor surface (A) and the bracket (E) is within 0.59 and 0.98 in (1.5 and 2.5 mm). When
4.
checking, move the drive pedal (F) towards the bracket (E) to cancel the drive pedal end play.
If necessary, loosen the nuts (G) and the nut (H), and adjust the position of the bracket (E). When the adjustment is completed,
tighten the nuts (G) and (H).
Perform step 1 again.
5.
F
A
C
E
G
H
G
E
D
B
S301410