ADTRAN eSBC, Руководство по взаимодействию

Страница: 11 / 22

Integrating ADTRAN eSBC and NEC SV8100 Configuring the NEC SV8100
6AOSSG0027-42A Copyright © 2015 ADTRAN, Inc. 11
To configure the NEC SV8100 PBX, follow these steps:
• Step 1: Installing NEC SV8100 PBX and NEC SV8100 PCPro on page 11
• Step 2: Logging in to NEC SV8100 PCPro on page 11
• Step 3: Establishing Communications with the NEC SV8100 Chassis on page 12
• Step 4: Configuring a SIP Trunk Group on page 14
• Step 5: Configuring the SV8100 System Data Settings on page 14
Step 1: Installing NEC SV8100 PBX and NEC SV8100 PCPro
Install the SV8100 PBX as shown in the Network Topology diagram in Figure 2 on page 3 . Refer to the
Univerge SV8100 System Hardware Manual available from NEC for installation details. The LAN1
Ethernet interface connects to the LAN switch (NetVanta 1534P).
NEC SV8100 PBX configuration is performed using the NEC SV8100 PCPro software installed on a
Windows PC. Refer to the
Univerge SV8100 PC Programming Manual available from NEC for installation
details.
Step 2: Logging in to NEC SV8100 PCPro
Log in to PCPro with the Installer Mode default PCPro account using the user name tech and password
12345678 . Then, select OK . The NEC SV8100 PCPro main menu appears.