Integrating ADTRAN eSBC and NEC SV8100
Configuring the NEC SV8100
6AOSSG0027-42A
Copyright © 2015 ADTRAN, Inc.
16
2. In the
10-14: Managed Network Setup
menu, perform the following:
a. In the
01 - Min
field, enter the minimum IP address for the range of IP addresses leased by the DHCP
server.
b. In the
02- Max
field, enter the maximum IP address for the range of IP addresses leased by the
DHCP server.
3. Select
Apply
to apply the settings.
Configuring DHCP Option Information (10-16: Option Information Setup)
To specify the option given from the DHCP server to each client, follow these steps:
1. Select the
System Data
tab, then select
10-XX: Trunk Setup > 10-16: Option Information Setup
from the
System Data
pane. The
10-16: Option Information Setup
menu will appear.
2. In the
10-16: Option Information Setup
menu, perform the following:
a. In the
16 - SIP Server IP Address
field, enter the IP address of the SV8100 VoIP Interface (i.e.,
192.168.1.2
)
b. In the
27 - SIP Server Receiver Port
field, enter
5080
.
3. Select
Apply
to apply the settings.
Configuring the VoIP DSP Operating Mode (10-19: IPL DSP Resource Selection)
To allocate digital signal processor (DSP) resources for each SIP trunk to ensure their availability, follow
these steps:
1. Select the
System Data
tab, then select
10-XX: Trunk Setup > 10-19: IPL DSP Resource Selection
from the
System Data
pane. The
10-19: IPL DSP Resource Selection
menu will appear.
2. In the
10-19: IPL DSP Resource Selection
menu, allocate DSP resources for each SIP trunk configured
on the SV8100 (i.e.,
29, 30, 31, 32
). For
DSP Resource
001
through
004
, use the provided drop-down
menu to select
Used for IP trunks
or
Commonly used for both IP extensions and trunks
.
3. Select
Apply
to apply the settings.
Configuring the IP System Interconnection (10-23: IP System Interconnection Setup)
To configure the SIP server address and trunk access code used for the SV8100 PBX, follow these steps:
1. Select the
System Data
tab, then select
10-XX: Trunk Setup > 10-23: IP System Interconnection
Setup
from the
System Data
pane. The
10-23: IP System Interconnection Setup
menu will appear.
2. In the
10-23: IP System Interconnection Setup
menu, perform the following perform the following
for
Sys No. 0001
:
a. Check the
System Interconnection
check box.
b. Enter the LAN IP Address of the ADTRAN eSBC (i.e.,
192.168.1.1
) in the
IP Address
field.
c. Enter the desired trunk access code (e.g.,
9
) in the
Dial Number
field.
3. Select
Apply
to apply the settings.
