Integrating ADTRAN eSBC and NEC SV8100
Configuring the NEC SV8100
6AOSSG0027-42A
Copyright © 2015 ADTRAN, Inc.
15
a. For
Physical Port 001
, enter
29
in the
Trunk Logical Port
field, and select
SIP
using the provided
Trunk Type
drop-down menu.
b. For
Physical Port 002
, enter
30
in the
Trunk Logical Port
field, and select
SIP
using the provided
Trunk Type
drop-down menu.
c. For
Physical Port 003
, enter
31
in the
Trunk Logical Port
field, and select
SIP
using the provided
Trunk Type
drop-down menu.
d. For
Physical Port 004
, enter
32
in the
Trunk Logical Port
field, and select
SIP
using the provided
Trunk Type
drop-down menu.
3. Select
Apply
to apply the settings.
Configuring the SIP Trunk Service (10-12: CD-CP00 Network Setup)
To configure the SIP trunk service, follow these steps:
1. Select the
System Data
tab, then select
10-XX: Trunk Setup > 10-12: CD-CP00 Network Setup
from
the
System Data
pane. The
10-12: CD-CP00 Network Setup
menu will appear.
2. In the
10-12: CD-CP00 Network Setup
menu, perform the following:
a. Enter
0.0.0.0
in the
01 - IP Address
field.
b. Enter the LAN IP address of the ADTRAN eSBC (i.e.,
192.168.1.1
) in the
03 - Default Gateway
field.
c. Enter the LAN IP address of the NEC SV8100 (i.e.,
192.168.1.2
) in the
09 - IPL IP Address
field.
d. Select the subnet mask (i.e.,
255.255.255.0
) using the
10 - IPL Subnet Mask
drop-down menu
3. Select
Apply
to apply the settings.
Enabling the DHCP Server mode (10-13: DHCP Server Setup)
The NEC SV8100 provides an optional Dynamic Host Configuration Protocol (DHCP) server. NEC IP
phones can be setup to use either DHCP or static IP addressing. To enable DHCP server mode, follow
these steps:
1. Select the
System Data
tab, then select
10-XX: Trunk Setup > 10-13: DHCP Server Setup
from the
System Data
pane. The
10-13: DHCP Server Setup
menu will appear.
2. In the
10-13: DHCP Server Setup
menu, check the
01 - DHCP Server Mode
check box.
3. Select
Apply
to apply the settings.
Specifying the DHCP IP Address Range (10-14: Managed Network Setup)
To specify the range of IP addresses which the SV8100 DHCP server leases to a client, follow these steps:
1. Select the
System Data
tab, then select
10-XX: Trunk Setup > 10-14: Managed Network Setup
from
the
System Data
pane. The
10-14: Managed Network Setup
menu will appear.
