NCT-04/03/02 Punch CNC System (Commissioning Manual)
2.7
Trial Processing
2.7.1
Processing Parameter Settings (mechanical for example)
P1.085
punch control
mode
: Mechanical
P1.078 punching mode: Continuous - distance
P1.084 maximum punching step;
P1.083 punching movement mode;
P1.025 feed rate;
P1.026 feed initial speed;
P1.027 feed acceleration;
P1.035 maximum feed rate;
For the above parameters, see "Maintenance Manual" for details;
2.7.2
Trial Run under
MDI
Add the following G codes to the MDI, and press "Start" to process;
G90G54 // absolute coordinate programming, coordinate system G54;
T2 // retooling
G00 X100 Y100; // punch at position (100,100);
G91 G28 X0 Y0 //XY reference point
M30 // End program and return to the program header
2.7.3
Operation Sequence in Auto Mode
2.7.3.1
Punching Center Distance Settings
1.Press [Coordinates] to enter the coordinate system setting interface;
2.Set G54 coordinate offset
3.XY is the offset of workpiece origin relative to the machine zero
2.7.3.2
Machine Tool Reference Point
4.Press the [Home] key to enter the home mode,
5.Press [Start], and the system performs T, XY axis reference point operation respectively;
6.Clamp the sheet metal after returning to reference point;
2.7.3.3
Copy Processing Files with USB Disk
Copy the program from external USB disk to the CNC memory directly
Follow the steps below:
7.Insert USB disk;
8.Press [PROG] and [FILE] in the menu to enter the file operation screen;
9.Select data traveler (U) disk, and press [EOB] to enter the USB disk;
10.Move the cursor to select the file on the USB disk;
11.Press [Copy] to copy the file;
Содержание NCT-02
Страница 12: ...NCT 04 03 02 Punch CNC System Commissioning Manual ...
Страница 20: ...NCT 04 03 02 Punch CNC System Commissioning Manual 3 Operation 3 1Controller Operation Sequence and Processes ...
Страница 28: ...NCT 04 03 02 Punch CNC System Commissioning Manual Mechanical off clutch flow chart Fig 3 3 ...