Adtech NCT-02, Руководство пользователя

Страница: 19 / 29

NCT-04/03/02 Punch CNC System (Commissioning Manual)
17.Press the operating mode selection key and switch to automatic operating mode;
18.Press to run the program, start indicator is lit, and the program begins running.
19.Press Reset directly if exception occurs during running, and the system will reset and
continue processing;
Repeat steps 4-18;
20.If the program aborts, press [Punch Lock] in the next processing to locate the punching until the
position that operation was aborted, and then cancel punching lock;