data throughput is reduced by
approximately 3.0%.
2.12
Rate Priority
The Rate Priority control allows the
operator to designate which rate
will be kept constant. When the
Symbol Rate is entered and Rate
Priority is Symbol, the symbol rate
is held constant and the Interface
rate is calculated. When the
Interface Rate is entered and Rate
Priority is Interface, the interface
rate is held constant and the
symbol rate is calculated.
Symbol
Interface
2.13
Symbol Rate
The number of symbols
transmitted per second. The
amount of data per symbol is
dependant upon the modulation
type, e.g. QPSK, 8PSK, etc.
Range can be determined by feature
key.
2.14
Interface
Rate
The Interface Rate is the bit rate at
the baseband interface.
Range can be determined by feature
key.
2.15
Carrier Mode
The Carrier Mode control allows the
operator to select ON for normal
operations or select one of four
unmodulated carriers. The Pure
Carrier option will provide an
un-modulated output carrier at the
desired frequency and output
power.
Pure Carrier
Modulated
2.16
10Mhz Clock
Allows operator to generate or pass
a 10Mhz signal. The signal can be
generated internally or sourced
externally.
*** This is a special order option.
If your unit does not have the
functionality the setting will read
“N/A”
OFF
ON
EXTERNAL
2.17
10 Mhz
Clock
Combined
Allows the operator to choose
whether or not to combine the
10Mhz signal with the L-Band
output.
*** This is a special order option.
If your unit does not have the
UNCOMBINED
COMBINED
