ADLY MOTO GK-125R, Руководство по обслуживанию

Страница: 70 / 111

9-8
TRANMISSION, KICK START
•
Disassembly the starter idle gear to
check if there is any damage.
•
Assembly the gear should base on
reversed procedure.
Check
•
Check the contact surface of L
crankcase and crank case cover if
there is any damage or wear-out.
Installation
•
The pin on starter idle gear shaft
should aim at the correct position of
L crankcase.
The pressed line on starter gear should
aim at the pressed mark of idle gear.
•
Put the starter spring into the stop
position.
•
Install the stopper plate.
•
Install the gasket and dowel pins.
•
Install the drive belt and drive face.
•
Install the L crankcase and kick starter
arm.
bush
Press mark
press line