BIOS Setup
53
NuPRO-A301
5.6
Power Management Setup
ACPI Function
This function enables PCs to implement Power Management func-
tions through the operating system and also provides the opportu-
nity to integrate the interface for controlling power management
and Plug-n-Play features on system devices. The options are
“Enabled” and “Disabled”.
Power Management
There are three settings for Power Management: Min. Power Sav-
ing, Max. Power Saving, and User Defined
Video Off Method
Use this to select the method to turn off the video. The options are
“Blank Screen”, “V/H SYNC+ Blank”, and “DPMS”.
Video Off In Suspend
When the system is in suspend mode, the video will turn off.
Options: “No” and “Yes”.
Suspend Type
Select the suspend type. Options: Stop Grant, Pwron suspend.
Phoenix – Award BIOS CMOS Setup Utility
Power Management Setup
ACPI Function
Power Management
Video Off Method
Video Off In Suspend
Suspend Type
MODEM Use IRQ
Suspend Mode
HDD Power Down
Soft-Off by PWR-BTTN
Wake-Up by PCI Card
Power On by Ring
Resume by Alarm
X Date (of Month) Alarm
X Time(hh:mm:ss) Alarm
Enabled
User Define
DPMS
YES
Stop Grant
3
Disabled
Disabled
Instant-Off
Enabled
Disabled
Disabled
0
0 : 0 : 0
Item Help
_____________________________
Menu Level
¾
↑↓→←
Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-safe defaults F7: Optimized Defaults
Содержание NuPRO-A301
