Getting Started
27
NuPRO-A301
3.2
Installing the CPU Fan and Heatsink
The following CPU fan and heatsink assemblies are recom-
mended for use with the NuPRO-A301:
CAUTION:
The NuPRO-A301 requires a chassis with an airflow inlet and
maximum internal ambient temperature of 60° C. A recom-
mended CPU fan and heatsink must be installed before using
the SBC. Failure to install a CPU fan and heatsink may dam-
age the CPU and/or the SBC.
1U LGA 775 CPU Cooler
Dimensions:
• Heatsink: 92 x 87.6 x 28 mm
• Fan: 75 x 75 x 15 mm
Heatsink: Copper base + copper skived fin
Fan speed: 5500 RPM
Fan airflow: 10.48 CFM
Noise level: 51 dBA
Part number: 32-20065-0000
3U LGA 775 CPU Cooler
Dimensions:
• Heatsink: 100 x 100 x 70 mm
• Fan: 90 x 90 x 25 mm
Heatsink: Aluminum extrusion
Fan speed: 4500 RPM
Fan airflow: 57.7 CFM
Noise level: 47.5 dBA
Part number: 32-20058-0000 + 34-30381-0000
Copper-Core Cooler
Dimensions: 115 x 115 x 61.4 mm
Heatsink: Aluminum excopper core
Fan speed: 4500 RPM
Fan airflow: 76.9 CFM
Noise level: 49 dBA
Part number: 32-20086-0000
Содержание NuPRO-A301
