ADLINK Technology NuPRO-A301, Руководство пользователя

Страница: 52 / 80

40 BIOS Setup
IDE Channel Master/Slave
This selection brings up the configuration submenu of the desig-
nated device.
IDE HDD Auto-detection: Press Enter to auto-detect the HDD on
the selected channel.
IDE Channel 0 Master/Slave: (None/Auto/Manual) Selecting
'manual' allows the user to set the remaining fields on the sub-
menu.
Capacity: Auto display disk size Disk drive capacity (approxi-
mated).
Access Mode: (CHS/LBA/Large/Auto) Selects the access mode
for a hard disk The following options are selectable only if the 'IDE
Primary Master' item is set to 'Manual'
Cylinder: (Min = 0, Max = 65535) Sets the number of cylinders for
a hard disk.
Head: (Min = 0, Max = 255) Sets the number of read/write heads
Precomp: (Min = 0, Max = 65535)
Landing zone: (Min = 0, Max = 65535)
Sector: (Min = 0, Max = 255) Number of sectors per track
NOTE:
NOTE:
PRECOMP=65535 means NONE.
NOTE:
NOTE:
Disk size is usually slightly greater than the size of a formatted
disk given by a disk checking program.
WARNING:
Setting a value of 65535 means no hard disk
WARNING:
Setting a value of 65535 means no hard disk