58
BIOS Setup
5.10 Load Fail-Safe Defaults
Use this menu to load the BIOS default values for the minimal/sta-
ble performance for your system to operate. Press <Y> to load the
BIOS default values for the most stable, minimal-performance sys-
tem operations.
5.11 Load Optimized Defaults
Use this menu to load the BIOS default values that are factory set-
tings for optimal performance system operations. While Award has
designed the custom BIOS to maximize performance, the factory
can change these defaults to meet its needs. Press <Y> to load
the default values setting for optimal performance system opera-
tions.
5.12 Set Supervisor & User Password
These two options set the system password. Supervisor Password
sets a password that will be used to protect the system and Setup
utility. User Password sets a password that will be used exclu-
sively on the system. To specify a password, highlight the type you
want and press <
Enter
>. The “Enter Password:” message
prompts you on the screen. Type the password, up to eight char-
acters in length, and press <
Enter
>. The system confirms your
password by asking you to type it again. After setting a password,
the screen automatically returns to the main screen.
5.13 Save & Exit Setup
This option allows you to determine whether to accept any modifi-
cations or not. Typing
Y
will quit the setup utility and save all
changes into the CMOS memory. Typing
N
will return to the Setup
Utility Main Screen.
5.14 Exit Without Saving
Select this option to exit the Setup utility without saving the
changes you have made in this session. Typing
Y
will quit the
Setup utility without saving any modifications. Typing
N
will return
to Setup utility.
Содержание NuPRO-A301
