ADLINK Technology NuPRO-A301, Руководство пользователя

Страница: 61 / 80

BIOS Setup 49
NuPRO-A301
On Chip IDE Device
IDE HDD Block Mode
If your IDE hard drive supports block mode select Enabled for
automatic detection of the optimal number of block read/writes per
sector the drive can support.
IDE DMA Transfer Access
Use this field to enable or disable IDE DMA transfer access.
On-Chip Primary PCI IDE
Enable/disable the Primary IDE channel.
IDE Primary/Secondary Master/Slave PIO/UDMA Mode
Each IDE channel has both a master and a slave, making four IDE
devices possible. Because two IDE devices may have a different
Mode timing (0, 1, 2, 3, 4), it is necessary for these to be indepen-
dent. The default setting “Auto” will allow auto detection to ensure
optimal performance.
Phoenix – Award BIOS CMOS Setup Utility
OnChip IDE Device
IDE HDD Block Mode
IDE DMA transfer Access
On-Chip Primary PCI IDE
IDE Primary Master PIO
IDE Primary Slave PIO
IDE Primary Master UDMA
IDE Primary Slave UDMA
On-Chip Secondary PCI IDE
IDE Secondary Master PIO
IDE Secondary Slave PIO
IDE Secondary Master UDMA
IDE Secondary Slave UDMA
***On-Chip Serial ATA Setting***
On-Chip Serial ATA
SATA Port Speed Setting
X PATA IDE Mode
SATA Port
Enabled
Enabled
Enabled
Auto
Auto
Auto
Auto
Enabled
Auto
Auto
Auto
Auto
Enhanced Mode
Disabled
Primary
P1, P3 is Secondary
Item Help
____________________________
Menu Level
¾
If you IDE hard drive supports block
mode select Enabled for automatic
detection of the optimal number of
block read/writes per sector the
drive can support.
↑↓→←
Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-safe defaults F7: Optimized Defaults