Getting Started
•
25
3
Getting Started
This chapter gives a summary of what is required to setup an operational
system using the NuPRO-900A. Hardware installation and BIOS overview is
discuss.
3.1
CPU Installation
The NuPRO-900A CPU module supports single/dual FC-mPGA2 Intel low
power Xeon processor with a front side bus (FSB) of 400MHz or 533MHz.
Users need to install highly efficient CPU fan/cooler to guarantee the systems
stability.
To install the CPU follow the steps below carefully:
1. Lift the lever on the CPU socket.
2. Insert the CPU in the socket, making sure that pin 1 of the CPU aligns
with pin 1 of the socket (both corners are marked with a triangle - see
Figure 5.
Figure 5: mPGA604 Socket
Lever
Triangle
Содержание NuPRO-900A
