ADLINK Technology NuPRO-840 DV Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 62

ADLINK Technology NuPRO-840 DV Скачать руководство пользователя страница 37

Driver Installation

•

27

8

Driver Installation

This chapter describes the installation procedures of all the device drivers
associated with the NuPRO-840 for Windows 95/98/ME/NT4.0/2000/XP.
For installation information of non-Windows based operating systems,
please refer the extensive explanation inside the ADLINK CD

Intel 845D Chipset Hardware Configuration File
Installation

This section describes system requirements of Intel 845D chipset Device
Driver. This driver has been designed for and tested with Windows
95/98/ME/2000/XP.

The system must contain an Intel Pentium 4 processor and chipset
configuration. Ensure that a mouse is connected to the system. One of
the following versions of Windows 95/98/ME/2000/XP must be installed
on the system prior to running the utility program.

•

Windows* 95 4.00.950 (Original Release)

•

Windows* 95 4.00.950a (OSR1)

•

Windows* 95 4.00.950b (OSR2 without USB Supplement)

•

Windows* 95 4.00.950b (OSR2.1 with USB Supplement)

•

Windows* 95 4.00.950c (OSR2.5 with or without USB

Supplement)

•

Windows* 98 4.10.1998 (Original Release)

•

Windows* 98 SE 4.10.2222 (Original Release)

•

Windows* Me 4.90.3000 (Original Release)

•

Windows* 2000 5.00.2195 (Original Release)

•

Windows* XP 5.10.2526 (Release Candidate 2)

«
...
35
36
37
38
39
...
»

Содержание NuPRO-840 DV































































Отзывы:

Нет отзывов