ADLINK Technology NuPRO-840 DV Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 62

ADLINK Technology NuPRO-840 DV Скачать руководство пользователя страница 20

10

•

Getting Started

2

Getting Started

This chapter summarizes the information needed to make the NuPRO-
840 operational. This chapter should be read before using the board.

Unpacking

Check the shipping carton for any damages. If the shipping carton and
contents are damaged, notify the dealer for a replacement. Retain the
shipping carton and packing material for inspection by the dealer. Obtain
authorization before returning any product to ADLINK.

Check the following items are included in the package, if there is any
missing items, contact your dealer:

•

The NuPRO-840 module

•

This User’s Manual

•

ADLINK CD

Note:

The package of the NuPRO-840 OEM version (non-standard

configuration, functionality or package) may vary according to the
different configuration requests

CAUTION:

This board must be protected from static discharge and

physical shock. Never remove any of the socketed parts
except at a static-free workstation. Use the anti -static bag
shipped with the product to handle the board. Wear a wrist
strap grounded through one of the system's ESD Ground
jacks when servicing system components.

«
...
18
19
20
21
22
...
»

Содержание NuPRO-840 DV































































Отзывы:

Нет отзывов