Adeunis RF COMFORT MQTT, Руководство пользователя

Страница: 75 / 79

User Guide | COMFORT SERENITY MQTT | NB-IoT / LTE-Cat-M1 75
The user can display the visual indicator corresponding to the last measured CO2
concentration level by pressing the side button for less than 5 seconds.
Timing
To preserve the sensor's battery life while maintaining responsiveness for users, a
timer has been programmed for each measured CO2 concentration state.
Initially, the LED blinks immediately after the measurement is taken (configured by
the user). Then, if the LED indicator status remains unchanged, the LED blinks
cyclically according to the following default configuration:
Green: every 10 minutes
Orange: every minute
Red: every minute
The number of LED blinks and the frequency of each LED's visualization can be
configured by the user through the NFC IoT Configurator app.
📱
To configure the visual indicator via the NFC IoT Configurator
application, go to the "CONFIGURATION" menu => Select the "LEDS"
section => Modify the "CO2 Concentration Visual Indicator" parameter to
change the number of LED blinks => Then modify the three parameters
"CO2 concentration indicator visualization frequency" => Apply the new
configuration to the product via NFC.
Disabling the Visual Indicator
The visual indicator for CO2 concentration can be disabled via the NFC IoT
Configurator app.
Displaying the Last CO2 Concentration Level