Adeunis RF COMFORT MQTT, Руководство пользователя

Страница: 67 / 79

User Guide | COMFORT SERENITY MQTT | NB-IoT / LTE-Cat-M1 67
📱
Configuration via the NFC IoT Configurator App
Go to the "CONFIGURATION" menu of the sensor.
=> Go to the "APPLICATIVE" section => Configure the sensor sampling
frequency to 1800 seconds => Configure the transmission period to 14400
seconds.
=> Go to the "TEMPERATURE" section => Enable the high threshold
alarm mode => Set the high threshold detection to 24°C and the
hysteresis to 2°C.
=> Go to the "CO2" section => Enable the alarm mode => Set the high
threshold detection to 1300 ppm and the hysteresis to 30 ppm.
=> Go to the "APPLICATIVE" section => Verify the threshold status.
=> Apply the new configuration to the product via NFC.
ANNEX 6: CONFIGURING A BLACKOUT
PERIOD
The COMFORT Serenity product allows the user to define a period during which the
product will no longer perform periodic transmissions.
The table below lists the parameters to configure in order to define a blackout period:
Parameters Description Default Configuration
Main Functions Blackout
Period
Period during which the
product does not perform any
sensor value transmissions
Disabled
Blackout Start Time
Start time of the blackout
period
22:00 (10:00 PM)
These parameters can be configured using the NFC IoT Configurator app.