Adeunis RF COMFORT MQTT, Руководство пользователя

Страница: 26 / 79

User Guide | COMFORT SERENITY MQTT | NB-IoT / LTE-Cat-M1 26
When the product needs to send data, it exits PSM mode and temporarily rejoins
the network. It establishes a connection with the base station and transmits the
collected data.
Once the data is transmitted, the product returns to a low-power consumption
state.
The user can configure the following PSM parameters via the NFC IoT Configurator
application:
The period during which the product is reachable by the network to receive
downlink data (T3324)
The deep sleep period during which the product remains attached to the network
but is unreachable (T3412)
📱 Go to the "CONFIGURATION" menu of the sensor => Select the
"NETWORK" section => Configure the "T3412 Multiplier," "T3412 Value,"
"T3324 Multiplier" and "T3324 Value" parameters => Apply the new
configuration to the product via NFC.
Please note that while the product indicates the desired reachability period and the
PSM period to the network, these trigger values (T3324 and T3412) can be modified
by the network during the attachment procedure or when updating its location (TAU).