SmartView Multiscreen
Installation and Use
Page 16
L1
- SmartView Multiscreen locks on to active ports only during autoscanning
(default)
L2
- SmartView Multiscreen locks on to every port during autoscanning
L3
- SmartView Multiscreen powers on in autoscan mode and locks on to active
ports only
L4
- SmartView Multiscreen powers on in autoscan mode and locks on to all ports
L5
– Allow the mouse to run at any speed (default)
L6
– Don't allow the mouse to run at very slow speeds
L7
- Cascade query code = AD (default)
L8
- Cascade query code = EF
T1
- 2 seconds autoscan delay time before switching to next port (default)
T2
- 5 seconds autoscan delay time before switching to next port
T3
- 7 seconds autoscan delay time before switching to next port
T4
- 10 seconds autoscan delay time before switching to next port
T5
- 15 seconds autoscan delay time before switching to next port
T6
- 20 seconds autoscan delay time before switching to next port
T7
- 30 seconds autoscan delay time before switching to next port
T8
- 60 seconds autoscan delay time before switching to next port
U1
- SmartView Multiscreen channels are switchable using a 3 button mouse
or IntelliMouse (default)
(SmartView Multiscreen reports 2 button mouse mode to PCs)
U2
- SmartView Multiscreen channels are not switchable using 3 button mouse
or IntelliMouse
(SmartView Multiscreen reports 2 button mouse mode to PCs)
U3
- SmartView Multiscreen channels are not switchable using 3 button mouse
or IntelliMouse
(SmartView Multiscreen reports 3 button mouse mode to PCs)
U4
- SmartView Multiscreen channels are switchable using 3 button mouse
or IntelliMouse
(SmartView Multiscreen reports IntelliMouse mode to PCs)
U5
- SmartView Multiscreen channels are not switchable using 3 button mouse
or IntelliMouse
(SmartView Multiscreen reports IntelliMouse mode to PCs)
