background image

25

 

 

Warranty 

CROW LIMITED WARRANTY 

(Crow) warrants this product to be free from defects in materials and 
workmanship under normal use and service for a period of one year 
from the last day of the week and year whose numbers are printed on 
the printed circuit board inside his product. 
Crow’s obligation is limited to repairing or replacing this product, at its 
option, free of charge for materials or labor, if it is proved to be 
defective in materials or workmanship under normal use and service. 
Crow shall have no obligation under this Limited Warranty or otherwise 
if the product is altered or improperly repaired or serviced by anyone 
other then Crow. 
There are no warranties, expressed or implied, of merchantability or 
fitness for a particular purpose or otherwise, which extend beyond the 
description on the face hereof. In no case shall Crow be liable to 
anyone for any consequential or incidental damages for breach of this 
or any other warranty, expressed or implied, or upon any other basis of 
liability whatsoever, even if the loss or damage is caused by Crow’s 
own negligence or fault. 
Crow does not represent that this product can not be compromised or 
circumvented; that this product will prevent any person injury or 
property loss or damage by burglary, robbery, fire or otherwise; or that 
this product will in all cases provide adequate warning or protection. 
Purchaser understands that a properly installed and maintained 
product can only reduce the risk of burglary, robbery or other events 
occurring without providing an alarm, but it is not insurance or a 
guarantee that such will not occur or that there will be no personal 
injury or property loss or damage as a result. Consequently, Crow shall 
have no liability for any personal injury, property damage or any other 
loss based on claim that this product failed to give any warning. 
However, if Crow is held liable, whether directly or indirectly, for any 
loss or damage arising under this limited warranty or otherwise, 
regardless of cause or origin, Crow’s maximum liability shall not in any 
case exceed the purchase price of this product, which shall be the 

complete and exclusive

 remedy against Crow. 

 

 

 

 

Содержание Ultra-8/16




























Отзывы: