ADC HiGain HXU-358, Руководство пользователя

Страница: 28 / 76

Provisioning LTPH-TP-1044-01, Issue 1
18 April 6, 2001 HXU-358 V1.04
C
ONFIGURING THE
DS3 P
ORT
Figure 11. Config Menu: DS3 Port
Table 3 on page 19 lists the HXU-358 service states to be implemented and
defines what functions are enabled for each service state. There is a separate
service state for the DS3 port and for each of the 28 DS1 ports.
During installation, a physical coax loop cable is required to
prevent alarms on the DS3 line if no facility is available.
Main Monitor History Config Test Inventory Quit Help
+-------------------+
| T1/E1 Ports |
|
DS3 Port |
+-----------------------------------------------------------+
| Service Mode(OUT OF SERVICE,IN SERVICE..): MEMORY ADMIN |
| Protection Mode (PROTECTED,UNPROTECTED) : PROTECTED |
| DS3 Mode (M13,C-BIT) : M13 |
| Line Buildout (100FT,450FT) : 100FT |
| Transmit Timing (LOCAL,LOOP) : LOCAL |
| BER Threshold (E-03,E-06,E-09) : E-03 |
| RAI upon DS1 Loopback (DISABLED,ENABLED) : DISABLED |
+-----------------------------------------------------------+
| Restore Defaults
|
+-------------------+
Use <Spacebar> to cycle through option settings and <Enter> to activate
ID: | Card 'A' 03/30/01 10:43:34 ALARMS: NONE