LTPH-TP-1044-01, Issue 1
Provisioning
HXU-358 V1.04
April 6, 2001
27
5
Change the port’s Timeslot setting of the time-slot in use by another port
to NO CONNECT by pressing the
, and then press
.
The ports are now ready to configure.
6
Change the port’s Timeslot setting of the time-slot that you want by
pressing the
, and then press
.
7
Change the port’s Timeslot setting of the time-slot in use by another port
by pressing the
, and then press
.
Any time-slot set to DOWN, PROTECTION or proceeded by a
“P” must be part of a DS1 protected circuit before they can be
changed. For complete information on protection switching,
refer to PSC-606 List 1 Technical Practice, document
LTPH-TP-1006-xx.
SPACEBAR
ENTER
SPACEBAR
ENTER
SPACEBAR
ENTER
