ADC 150-1425-31, Руководство пользователя, Страница: 28 / 88

System Configuration LTPE-UG-1017-01 Issue 1
18 February 15, 2001 UTU-731 List 1 and UTU-732 List 1
Logging On
To log on to the maintenance terminal console screen:
1 Press the several times to activate the autobaud feature and
to display the Logon Password screen ( Figure 7 below).
2 Type the password at the prompt or press . The console screen
menu bar displays ( Figure 8 on page 19 ).
Figure 7. Logon Password Screen
The key is the factory default password. If you
establish a different password, you must type the new
password (single word, no spaces, up to eight characters) on
each subsequent logon. If the system does not respond,
verify that the Hardware Flow Control of the maintenance
terminal is set to NONE.
The console screen menus are not available when the UTUs
are under the control of a shelf management unit.
The LTU-configured unit has a lockout feature that prevents
configuration changes from being made at the remote unit.
When this feature is enabled, the console screen menus
viewed at the NTU are read-only.
SPACEBAR
ENTER
ENTER