Field Service Documentation
1
Snap Server 700i Series
Copyright © 2007, Adaptec, Inc. All rights reserved. Information in this document is subject to change without notice and does not represent
a commitment on the part of Adaptec or any of its subsidiaries.
Replacing a PCI Card
Caution
There are static-sensitive electronics inside the unit. Before you handle any
parts, make sure you are working at a static-controlled workstation and that you are
properly grounded.
Two PCI cards can be replaced in the Snap Server 700i Series:
• SAS HBA
• Ethernet NIC
Shutting Down the Server
Caution
Shut down the server before you make any repairs.
Improper shutdown may
lead to physical harm or loss of data.
1
To start the shutdown process, push the power
button on the front of the server.
The system LED blinks 3 times per second and the
green power LED remains lit until the shutdown
process is complete. Do not disconnect the AC
power cord while the power LED remains lit.
2
After the power LED is off, disconnect the AC
power cord and all other cables from the back of the server.
3
The server is heavy. With the help of another person, remove the server from the
rack to a clean surface with ample room to the front and rear. See the FRU
procedure
Installing the Snap Server in a Rack
for instructions on removing the
server from the rack.
Power
